03931063-315 CAT Fuel Pump Seal 03931063-315T FKM PTFE HLPS Oil Seal

Place of Origin CHINA(MAINLAND)
Brand Name SUNCAR
Certification ISO9001
Model Number 03931063-315 CAT
Minimum Order Quantity 100 PCS
Price Negotiation
Packaging Details PP bag inside, carton box outside
Delivery Time 3-5 days after payment received(public holiday excluded)
Payment Terms Western Union, L/C, T/T, MoneyGram, D/A, D/P
Supply Ability 1000 pcs per month
Product Details
Products Name HLPS Oil Seal/ CAT Fuel Pump Seal Material FKM+PTFE
Part Number 03931063-315, 03931063-315T Sample Available
Size 10*27*8.5 Feature Oil & High Pressure & High Temperature Resistant
High Light

Hydraulic Oil Seal

,

03931063-315 CAT Fuel Pump Seal

,

Rotary Shaft Seals

Leave a Message
Product Description

 

03931063-315 CAT Fuel Pump Seal 03931063-315T FKM PTFE HLPS Oil Seal

 

Product Name HLPS Oil Seal/ CAT Fuel Pump Seal
Part Number 03931063-315, 03931063-315T
Material FKM+PTFE
Place of Origin China(Mainland)
Brand name SUNCAR
Packing PP bag inside, carton box outside
Shipping Mode By air, by sea, by express(FedEx, UPS, DHL, TNT, etc.)
Payment Terms Western Union, Paypal, T/T, Transfer
Certification ISO9001
Warranty Unavailable
Condition New, genuine new
Sample Available
Feature Oil & high pressure & high temperature resistant
Size 10*27*8.5

 

Measures For Oil Leakage Due To Inadequate Oil Seal:
1. Master and recognize the basic knowledge of fake and inferior products, and purchase high-quality and standard oil seals.
2. During installation, if the roughness of the outer surface of the shaft diameter is low or there are defects such as rust, burrs, etc., smooth it with a fine emery cloth or whetstone; apply clean engine oil or grease to the lip of the oil seal or the corresponding position of the shaft diameter. Apply sealant to the outer ring of the oil seal, wrap the key way on the shaft with hard paper to avoid scratching the lip of the oil seal, and use a special tool to rotate and press the oil seal inwards. Do not smash the hard seal to prevent deformation of the oil seal or squeeze the spring and fail; If there is lip cuffing, the spring falls off and the oil seal is skewed, It must be removed and reinstalled. It should be noted that when the shaft diameter is not worn and the spring force of the oil seal spring is sufficient, do not tighten the inner spring without authorization.
3. The oil seals applied to machinery generally have to be inspected, maintained and maintained when the general working conditions are poor, the ambient temperature difference is large, the dust is excessive, and the vibration of the machine tool frequently changes the stress condition of the machine parts.
4. If the shaft diameter and bearing are seriously worn; The rubber seal oil is aging or the spring is invalid, etc., repair and replace the corresponding parts in time.

 

About Oil Seal Use Guides:

  • Oil seals that are not used temporarily should be kept properly to prevent contamination with oil, dust or sun exposure.
  • When the shaft diameter is worn into a "V"-shaped groove, so that the contact pressure between the new oil seal lip and the shaft cannot be reduced, the displacement method can be used to make up.
  • When the lubricating oil volume of the reducer is less than or equal to 7 liters, the amount of lubricant added per liter is 20-30ml;
  • When 7-15 liters, the amount added is 15-20ml per liter of lubricating oil;
  • When>15 liters, add 10ml per liter of lubricating oil.

 

Product Show:

03931063-315 CAT Fuel Pump Seal 03931063-315T FKM PTFE HLPS Oil Seal 0

03931063-315 CAT Fuel Pump Seal 03931063-315T FKM PTFE HLPS Oil Seal 1

 

Thanks for viewing our listings. Please click "ask a question", or call us if you have a parts need that you do not see listed here. We will do our best to locate the parts you need, and make every effort to save you money.