High Sealing Performance K9004604 Travel Motor Seal Kit Fits For Doosan DX180

High Sealing Performance K9004604 Travel Motor Seal Kit Fits For Doosan DX180

Our Product Range:

• We set up the PTFE polymer materials, PU polyurethane and NBR materials seals producing line. All sealing products are widely used in different kinds of excavator and breaker hammer installation and maintenance systems, wining high reputation from the customers at home and abroad. Our factory :The following seal kits we also can supply:

* Hydraulic pump seal kit

* Control valve seal kit

* O ring kit box

* Gear pump seal kit

* Travel motor seal kit

* Swing motor seal kit

* Pilot valve seal kit/PPC seal

* Adjuster seal kit

* Center joint seal kit

* Boom cylinder seal kit

* Arm cylinder seal kit

* Bucket cylinder seal kit

* Breaker hammer seal kit

Storage Precautions:

• When storing seals, please pay attention to the following items:

1. Do not open the seal package when it is not necessary, otherwise dust will stick to the seal or scratch the seal.

2. Store in a cool place, not in direct sunlight. Ultraviolet rays and water vapor will accelerate the deterioration and dimensional changes of rubber and plastics.

3. When storing unpackaged products, be careful not to stick or pack impurities and store them in their original state. Nylon should be sealed tightly to prevent dimensional changes.

4. Do not place the seals close to heat sources, such as boilers, furnaces, etc. The heat will accelerate the aging of the seals.

5. Do not place the seal near the motor or where ozone is generated.

6. Do not hang the seal with needles, iron wire or rope, otherwise it will deform the seal and damage the lip.

7. The surface of the seal sometimes has color changes or white powder (blooming phenomenon), which will not affect the performance of the seal.

8. The RAREFLON ring of the combined seal is easily scratched if it drops or is impacted by the outside, so it must be handled with special care.

Seal ClassifiC.A.Tion:

• Static seal: There are three main C.A.Tegories: gasket seal, sealant seal and direct contact seal. According to the working pressure, static sealing can be divided into medium and low pressure static sealing and high pressure static sealing. Medium and low pressure static seals usually use softer and wider gasket seals, while high-pressure static seals use harder metal gaskets with a narrow contact width.
• Dynamic seal: It can be divided into two basic types: rotary seal and reciproC.A.Ting seal.

Product Show: