Swing Cylinder Seal Kit 20T-63-86104 20T6386104 Komatsu Swing Cylinder Sealing Kit For PC40-2 PC40-3

Product Show:

Other Products We Can Offer You:

Oil Seal

O-Ring

Loader Seal Kit

Floating Seal

Hydraulic Breaker Seal Kit

Excavator Hydraulic Parts

Control Valve Seal Kit

Swing Motor Seal Kit

Crankshaft Rear Seal

Crankshaft Front Seal

Track Adjuster Seal Kit

Center Joint Seal Kit

(Main) Control Valve Seal Kit

Blade Lift/Tilt/Steering Cylinder Kit

FAQ:
1. What should I do if I only know the excavator model but cannot provide the excavator number and model?
A: If possible, you can send us pictures of old products, nameplates or sizes for reference.

2. How to pay for the order?
A: We can receive payment by T/T, Western Union, Paypal, bank transfer.

3. When will I receive the order after placing the order?
A: After confirming your payment, we will send the goods within 3 days; if there is no stock, we will inform you before placing the order.

4. What should I do if there is a problem with the product?
A: First of all, I have confidence in the quality of our products, if you really find something wrong, please provide us with pictures and we will check.

5. What is your main product?
A: We specialize in the production of O-rings, reciproC.A.Ting rings, oil seals, piston seals, piston rod seals, and other hydraulic seals as well as hydraulic seal kits, such as boom/ arm/ bucket cylinder seal kits, center joint seal kits, hydraulic pump seals Kits, travel motor seal kits, swing motor seal kits, transmission seal kits, control valve seal kits, oil seals, floating seals, etc.

Precautions:

1. Before designing grooves, please read the descriptions of each series of products by yourself, and clearly distinguish whether the product uses an integral groove or a split groove; during the process of installing the seals, pay attention to avoid sharp edges, and the hole seals must be installed in the integral groove. With the help of installation tools; the designer must consider parameters such as groove dimensional accuracy, surface roughness, extrusion gap, etc. For details, please refer to the product instruction manual, diagram and size table.

2. Before installing the seal, it must be ensured that there are no impurities and cracks in the sealing groove, and operating oil should be applied to the sealing groove and the surface of the seal respectively; the seals should be installed gradually in sequence; Avoid twisting and skewing; if it is a split slot, tighten the gland last.