707-98-12320 7079812320 Slide Arm Cylinder Seal Kit For PC50UU-2 Komatsu Slide Arm Cylinder Repair Seal Kit

Product Show:

Related Part:

Precautions:

1. Before designing grooves, please read the descriptions of each series of products by yourself, and clearly distinguish whether the product uses an integral groove or a split groove; during the process of installing the seals, pay attention to avoid sharp edges, and the hole seals must be installed in the integral groove. With the help of installation tools; the designer must consider parameters such as groove dimensional accuracy, surface roughness, extrusion gap, etc. For details, please refer to the product instruction manual, diagram and size table.

2. Before installing the seal, it must be ensured that there are no impurities and cracks in the sealing groove, and operating oil should be applied to the sealing groove and the surface of the seal respectively; the seals should be installed gradually in sequence; Avoid twisting and skewing; if it is a split slot, tighten the gland last.

FAQ:

Q1: Can I get the sample?

Yes, pay sample, freight collect.

Q2: When will you ship my order?

Normally, it is within 3 days after the customer pays.

Q3: How long can I receive the goods?

It depends on the mode of transportation.

Q4: How can I trace my order?

We will send the tracking number to you by e-mail or other contact details.

Q5: Quality of the products have a guarantee?

Please feel free to buy, 100% strict control to ensure product quality.

Storage conditions for seals:

1. The storage room temperature of the seals should preferably be below 30 °C to avoid high temperature aging of the seals;

2. The seal must be stored in a sealed package to avoid contact with moisture or dust in the air;

3. The seals must be protected from strong light to avoid the seals being eroded by ozone in the air or prematurely aging.

The factors affecting the performance of various seals are different, such as mechanical seals (packing seals, etc.) affecting factors such as temperature, medium, wear, and pressure.